Table of Contents
Advertisement
3. Do not use metal utensils, which reflect microwaves and
may cause electrical arcing. Do not put cans in the oven.
4. Do not place anything on the outer cabinet during
operation.
5. Do not use the oven near a steamer or a fryer.
NOTE
1. If you are unsure how to connect your oven, please
consult an authorized qualified electrician.
INSTALLATION INSTRUCTIONS
WARNING: Always keep the caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS) close to the oven for
your reference.
1) Remove all packing materials from the inside of the
oven cavity. Remove all the blue protective film
from the outside of the oven.
2) Check the oven carefully for any signs of damage.
3) Place the oven on a flat, level surface strong enough
to support the oven's weight plus the heaviest item
likely to be cooked.
Do not place this oven in a position which is not
easily accessible. To position the oven too high
can be dangerous because food can not be
removed safely.
4) Ensure there is a minimum free space above the
oven of 15 cm.
ACCESSORIES
Check to make sure the following accessories are provided:
Manuals and others
• Operation manual
• Menu sticker
Enter cooking times or dish names in this sticker and attach to the control panel.
• Caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS: part code TCAUHA429WRRZ and
TCAUHA445WRRZ)
NOTE:
• When you order accessories, please mention the two items: part name and model name to your dealer or
SHARP authorized service agent.
• The model name is printed on the cover of this operation manual.
2. Neither the manufacuture nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
3. Water vapour or drops may occasionally form on
the oven walls or around the door seals and sealing
surfaces. This is a normal occurrence and is not an
indication of microwave leakage or a malfunction.
5) Securely connect the plug of the oven to a standard
earthed (grounded) household electrical outlet.
6) The unit may be secured to a countertop or stand.
There is a screw hole in the bottom of the unit. After
the oven is permanently placed, drill a hole through
the counter top for a 5 mm self-tapping screw. The
hole should be 20 mm from the left side of the outer
case cabinet and 180 mm back from the front edge
of the cavity face plate.
15 cm
7) This oven is not intended to stack one on top of
another.
3
180 mm
20 mm
Hole
Advertisement
Table of Contents
