Advertisement
•
Guide driver (Hexagonal)
To be used to turn the guide roller to adjustment of the linarity
of playback envelope.
•
INF adjustment lens
To be used for adjustment of the camera system. For the
usage of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
INF lens holder
To be used together with the Camera stand for operating the
Videocamera in the stripped-down condition such as the sta-
tus without the exterior parts or for using commodities that are
not yet conformable to the interchangeable ring. For the usage
of the INF lens holder, refer to the Service Bulletin No. YA-SB-
10035.
•
Camera stand
To be used together with the INF adjustment lens holder. For
the usage of the Camera stand, refer to the Service Bulletin
No. YA-SB-10035.
•
Light box assembly
To be used for adjustment of the camera system. For the
usage of the Light box assembly, refer to the Service Bulletin
No. YA-SB-10035.
•
Gray scale chart
To be used for adjustment of the camera system. For the
usage of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
Color bar chart
To be used for adjustment of the camera system. For the
usage of the INF adjustment lens, refer to the Service Bulletin
No. YA-SB-10035.
•
Alignment tape
To be used for check and adjustment of interchangeability of
the mechanism.
•
PC cable
To be used to connect the Videocamera and a personal computer
with each other when a personal computer issued for adjustment.
•
Communication cable
Connect the Communication cable between the PC cable and
Jig connector cable when performing a PC adjustment.
•
Service support system
To be used for adjustment with a personal computer. Software
can be downloaded also from JS-net.
•
Jig connector cable
Connected to JIG CONNECTOR of the main board and used
for electrical adjustment, etc.
4.2
JIG CONNECTOR CABLE CONNECTION
NOTE:
In the case of jig connector cable use, since you cannot per-
form supply from DC jack, use a battery terminal.
Connection procedure
GUIDE ROLLER (SUP)
COVER (JIG)
SCREW
JIG CONNECTOR CABLE
COMMUNICATION CABLE
JIG CONNECTOR
COMMUNICATION CABLE
RED
TO JLIP_RX
WHITE
TO JLIP_TX
BLACK
TO GND
GUIDE ROLLER (TU)
ADJUST
SCREW
JIG CONNECTOR
SERVICE SUPPORT SYSTEM
MENU
RS232C
PC CABLE
COM PORT
FOR
COMMUNICATION CABLE
PERSONAL COMPUTER
JIG CONNECTOR
OSCILLOSCOPE
TO ENV_OUT
TO HID1
(No.YF008)1-17
Advertisement
