Advertisement
2.3.6.3
Guide arm, pinch roller arm
2.3.6.3.1
Removal
(1) Remove the spring (a) from the hook (a) and detach the
guide arm assembly.
(2) Release the catch (a) to remove the lid guide.
(3) Remove the spring (b) from the hook (b) and detach the
pinch roller arm assembly.
Pinch roller arm assembly
Hook (a)
Guide arm assembly
Guide arm assembly
Fig.2-3-13
Catch (a)
Spring (b)
PRESS
LEVER
Hook (b)
LID GUIDE
Spring (a)
LID GUIDE
Pinch roller arm
assembly
PRESS
LEVER
2.3.6.4
Idler arm, idler gear 1/2
2.3.6.4.1
Removal
(1) Release the catches (a) and (b) to detach the idler arm.
(2) Detach the idler gear 1/2.
IDLER ARM
IDLER GEAR 1/2
Fig.2-3-14
2.3.6.5
Main brake (T), brake lever, tension arm,
reel disk (S/T), Rec safety lever
2.3.6.5.1
Removal
(1) Remove the spring (a). (Detach section (b) of the spring
(a).)
(2) Release the catch (a) to detach the main brake (T).
(3) Release the catch (b) to detach the reel disk (T) and the
spacer.
(4) Lift up and turn section (b) of the brake lever counterclock-
wise to remove the brake lever.
(5) Remove the spring (b) from the hook (a).
(6) Release the catch (c) to detach the tension arm.
(7) Release the catch (d) to detach the reel disk (S) and the
spacer.
(8) Remove the spring (c) from the hook (b).
(9) Turn the tension arm base in the direction shown by arrow
(a) to release catch (e). Place the projections of the tension
arm base to the holes (a) to detach the tension arm base.
(10) While releasing the catch (f), turn the Rec safety lever
counterclockwise to remove it.
Catch (b)
Catch
(a)
IDLER ARM
IDLER GEAR 2
IDLER GEAR 1
(No.86700)2-35
Advertisement
