Advertisement
3.2.3 DISASSEMBLY/ASSEMBLY OF [15] MONITOR ASSEMBLY
CAUTION
(1) During the procedure, be careful in handling the LCD
MODULE,etc., especially not to damage or soil the mon-
itor screen. If it is soiled with fingerprints, etc., gently
clean it with chamois or the cleaning cloth.
(2) Since the BACKLIGHT is soldered to the ASSEMBLY
BOARD, the BACKLIGHT should not be separated from
the ASSEMBLY BOARD except when replacing the
BACKLIGHT.
Disassembly procedure of MONITOR ASSEMBLY
(1) While removing the 4 screws (1-4) in numerical order
and disengaging the 6 hooks (L15a-L15f) in alphabetical
order, remove the MONITOR COVER ASSY.
(2) Remove the SENSOR BOARD ASSEMBLY from the
MONITOR CASE.
(3) Remove the FPC in CN15a and CN15b in alphabetical
order, and remove the MONITOR HINGE ASSEMBLY.
(4) Remove the FPC of LCD MODULE from 1 connector
CN15c.
(5) Remove 1 screw (5), and remove the BL BOARD AS-
SEMBLY together with the BACKLIGHT.
(6) Remove the SHEET (DIFF.).
(7) Remove the LCD FRAME.
(8) Remove the LCD MODULE.
(9) Remove the SHIELD CASE.
2
(S15a)
1
L15d
(S15a)
L15a
3
(S15b)
4
(S15b)
MONITOR HINGE
ASSEMBLY
b
CN15a
CN15b
L15e
a
SENSOR BOARD
ASSEMBLY
SD15a
.
.
:0.078N
m (0.8kgf
cm)
.
.
:0.246N
m (2.5kgf
cm)
Fig.3-2-3
L15e
MONITOR COVER
ASSEMBLY
L15f
L15c
L15b
BL2.5
BOARD ASSEMBLY
5
(S15a)
SD15b
b
c
CN15c
BACK LIGHT
SHEET(DIFF)
LCD FRAME
LCD MODULE
c
SHIELD CASE
L15f
a
MONITOR CASE
L15g
(No.YF008)1-13
Advertisement
