Advertisement
2.1.5.5
[11] SLIDE DECK ASSY
NOTE 11a:
Each of the parts on the SLIDE DECK ASSY can be replaced
separately.
When detaching the assembly, if there is no need to replace
any of its parts, remove the SLIDE DECK ASSY as it is.
NOTE 11b:
When mounting, pay attention to the positions of the [22]
SLIDE LEVER 2 ASSY studs and the [19] BRAKE CTL LE-
VER ASSY.
When mounting, position the CONTROL PLATE on the left
side.
Pay attention to the position of the SLIDE GUIDE PLATE dur-
ing mounting.
NOTE 11b
2.1.5.6
[12] PAD ARM ASSY
[13] -
[14] TU BRAKE ASSY
NOTE 12:
The spring may have already been disengaged when the [ 8 ]
SLANT POLE ARM ASSY was removed.
NOTES 14:
When mounting, pay attention to the correct positioning.
Mount the CONTROL PLATE by moving it fully toward the left
side.
NOTE 12,14
[12]
CONTROL
PLATE
2-10 (No.86700)
SLIDE GUIDE
PLATE
SPRING
[14]
14
(S11b)
(L11c)
(L11b)
13
(S11a)
NOTE 11b
Fig.2-1-18
[12]
(W12)
NOTE 12
(P12)
(W14)
(L12)
Fig.2-1-19
12
(S11a)
NOTE 11a
[11]
(L11a)
(P14)
[14]
NOTE 14
(L14)
Advertisement
