NordicTrack Elite zi User Manual page 8

4. With the help of a second person, hold the
handrail assembly near the Uprights (85, 88).
Connect the Upright Wire (86) to the 25" Wire
Harness (103). See the inset drawing. The
connectors should slide together easily and
snap into place. If they do not, turn one con-
nector and try again. IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE
CONSOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (86).
5. Insert the excess wire into the Right Upright (88)
as you set the handrail assembly on the Right
Upright and the Left Upright (85). Be careful
not to pinch any wires.
Attach the handrail assembly with four 3/8" x
1 1/4" Patch Bolts (1) and four 3/8" Star
Washers (8). Firmly tighten the Patch Bolts.
4
103
86
5
8
8
1
1
85
8
Handrail
Assembly
85
103
Wire
Tie
Handrail
Assembly
8
1
88
86
88
8
1