Initial Setup - Brother DCP-1518 User Manual

0.Initial Setup

0.Initial Setup
Level 2 Level 3
—
1.Date&Time
—
2.Station ID
—
3.Tone/Pulse
The factory settings are shown in Bold with an asterisk.
Descriptions 1 Options
Puts the date and
Year:20
time on the LCD and
in headings of faxes
you send if you set up
the station ID.
Month:
Day:
Time:
Sets up your name
Fax:
and fax number to
appear on each page
you fax.
Tel:
Name:
Chooses the dialling
Tone*
mode.
Pulse
General information
Descriptions 2 Page
Enter the last two
digits of the year on
the dial pad, and then
press OK.
Enter the two digits
for the month on the
dial pad, and then
press OK. (e.g. Enter
0, 1 for January.)
Enter the two digits
for the day on the dial
pad, and then press
OK. (e.g. Enter 0, 1
for 1st.)
Enter the time in 24-
hour format on the
dial pad, and then
press OK. (e.g. Enter
1, 5, 2, 5 for 15:25.)
Enter your fax
number (up to 20
digits) on the dial
pad, and then press
OK.
Enter your telephone
number (up to 20
digits) on the dial
pad, and then press
OK. If your telephone
number and fax
number are the
same, enter the
same number again.
Use the dial pad to 29
enter your name (up
to 20 characters),
and then press OK.
Your machine comes
set for Tone dialling
service.
If you have Pulse
dialling service
(rotary), you need to
change the dialling
mode.
1
1
9