Panasonic KX-PRL262 Operating Instructions Manual page 63

Problem
I cannot register a handset to a
base unit.
Battery recharge
Problem
The handset beeps and/or
flashes.
I fully charged the batteries, but
– still flashes,
– is displayed, or
– the operating time seems to
be shorter.
Making/answering calls, intercom
Problem
is displayed.
Noise is heard while talking,
sound cuts in and out.
Unexpected sounds from your
cellular phone are heard
through the unit's speaker.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
R The maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 42).
Cause/solution
R Battery charge is low. Fully charge the batteries (page 10).
R Clean the battery ends (
with a dry cloth and charge again.
R It is time to replace the batteries (page 10).
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit's AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 42).
R You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R While you are talking on a cellular call using the link to cell
feature, you may hear noise during a cellular call if your
smartphone is too close to the base unit. For best
performance, we recommend placing your smartphone
between 0.6 m to 3 m (2 feet to 10 feet) away from the
base unit.
R Apps installed on your smartphone may treat in-app
sound effects or others sounds as music. In this case,
these sounds may be heard through the unit's speaker.
Use your smartphone to quit the corresponding app.
Useful Information
, ) and the charge contacts
63