Getting Started; Setting Up - Panasonic KX-PRL262 Operating Instructions Manual

Getting Started

Setting up

Connections
R If you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 19).
n Base unit
Run the telephone line cord (
2
adaptor ( ) through the slot of the stand.
Connect the telephone line cord (
2
AC adaptor (
bottom of the unit until you hear a click.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
single-line telephone jack (RJ11C) until
you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV238.
1
1
2
1
10
1
) and AC
1
) to the jacks at the
5
2
2
For assistance, please visit http://www.panasonic.com/help
n Charger
Connect the AC adaptor plug to the
charger until you hear a click.
Connect the AC adaptor to the power
outlet.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV233.
) and
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
4
3
R Follow the directions on the display to set
up the unit.
Battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed (
1
1
).
1
2
, ).
1
).