Panasonic KX-PRL262 Operating Instructions Manual page 62

Useful Information
Problem
I cannot pair a cellular phone to
the base unit.
I cannot connect a cellular
phone to the base unit.
I cannot hear a dial tone.
I cannot use the Smart function
key even if the
flashing slowly.
The base unit beeps.
Menu list
Problem
The display is in a language I
cannot read.
62
Cause/solution
R Depending on the compatibility of the cellular phone, you
may not be able to pair it to the base unit. Confirm that
your cellular phone supports the hands-free profile (HFP)
specification.
R Confirm that the Bluetooth feature of your cellular phone
is turned on. You may need to turn this feature on
depending on your cellular phone.
R The Bluetooth technology on your cellular phone may not
be functioning normally. Turn off and on your cellular
phone.
R If your cellular phone is already connected to another
Bluetooth device, turn it off or disconnect it from your
cellular phone.
R Some cellular phones may require you to enter the
Bluetooth PIN to pairing. Confirm that you entered the
correct PIN.
R Confirm that your cellular phone is turned on.
R Confirm that your cellular phone is within base unit range
(page 14).
R Your cellular phone's Bluetooth feature is turned off. Turn
it on.
R Depending on the state of the wireless environment, such
as the presence of any electrical interference, there may
be a delay even if the auto connection feature is turned
on. You can connect to the base unit manually (page 19).
R The cellular phone has not been paired to the base unit.
Pair the cellular phone (page 17).
R The base unit's AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your service
provider/telephone company.
R Another unit is in use. Wait and try again later.
indicator is
R New messages have been recorded. Listen to the new
messages (page 52).
Cause/solution
R Change the display language (page 15).
For assistance, please visit http://www.panasonic.com/help