Table of Contents
Advertisement
Message
USE AC ADAPTER
NO UPDATES AVAILABLE
UPDATE CORRUPTED
INSTALLED UPDATE ON THIS
CAMERA CAN NOT BE USED
UPDATE IS SAME OR OLDER
VERSION. NO INSTALLATION
REQUIRED
POWER TURNED OFF TO
CONSERVE BATTERY POWER
(12 HOURS LIMITATION)
RECORDING CANCELLED
ABNORMALITY OCCURRED IN
PAN TILTER
POWER TURNED OFF AS
CAMERA TEMPERATURE IS TOO
HOT
PROCESS FAILED
54
Check
• When updating the firmware, connect the AC adapter.
• Check if the update file is written in the correct folder
on the SD card.
• Retrieve the firmware update file, and copy it to the SD
card.
• Obtain the updater for the unit.
• The firmware has already been updated. There is no
need to update it.
• The power is automatically turned off if "AUTO POWER
OFF" is set to "ON", the unit runs with the battery, and
no operation is performed for 5 minutes.
• Recording stops automatically as it cannot be
performed for 12 or more consecutive hours.
• Turn on the power again, and retry.
• Wait for a while, and turn on the power again.
• Setup, file deletion, etc. failed for some reason. Check
the connection, and retry.
Refer to
page 12
–
–
–
–
page 46
–
page 7
page 6
–
Advertisement
Table of Contents
