Troubleshooting
Connection
Problem
The battery cannot be charged.
The power does not turn on when
the battery is used.
The SD card cannot be inserted.
The power does not turn on when
the pantilter is attached.
48
Check
• Check the remaining battery. The battery is no longer
charged if already full.
• Charge the battery.
• Check if the connector is dirty. If it is dirty, clean it
with a cotton swab or the like.
• Check the orientation of the card.
• Check if the camera is attached firmly to the pantilter.
• Check if the AC adapter is connected to the pantilter.
Refer to
page 35
page 29
page 28
page 25
page 26