Maintenance - Speco VIP3D2M User Manual

6) Maintenance

• Maintenance Server
- Restart: The unit is restarted without changing any of the settings. Use this method if
the unit is not behaving as expected.
- Restore: The unit is restarted and most current settings are reset to factory default values.
The settings that are not affected are:
* the boot protocol (DHCP or static)
* the static IP address
* the default router
* the subnet mask
* the system time
- Default: The default button should be used with caution. Pressing this will return all of the
Network Camera's settings to the factory default values (including the IP address).
• Update Server
Carry out the upgrade by importing an upgrade file and pressing the Upgrade button. During the
upgrade, do not turn off the power of the Network Camera. And try an access again after waiting
five minutes or longer.
• Backup
Save a setting value that users enter to the Network Camera, to a user PC.
66