Sanyo SAP-K77GHAX Technical & Service Manual page 71

Displayed when
transmitting data
Displayed when
indoor unit
sensor is in use
(1) Operation mode
AUTO .....................................
HEAT ......................................
MILD DRY ..............................
COOL .....................................
FAN ........................................
(2) Fan speed
Automatic operation ...............
HIGH .....................................
MEDIUM.................................
LOW .......................................
(3) Temperature setting
16 – 30 °C
When set to 28 °C
temperature indication............
Remote Control Unit (Display)
Symbols
(4) Timer
(5) ECONOMY ............................
(6) Confirmation
(7) Auto. flap indication..........................
Displayed when
setting timer
12-hour ON Timer. .................
12-hour OFF Timer. ...............
1-hour OFF Timer. .................
of transmission.......................
Flap angle indication..............
Sweep indication....................
5