Front Panel Connector - ECS PM800-M2 Manual

ATX2: ATX 12V Power Connector
Pin Signal Name
1
Ground
2
Ground
3
+12V
4
+12V

Front Panel Connector

The front panel connector (PANEL1) provides a standard set of switch and LED connec-
tors commonly found on ATX or micro-ATX cases. Refer to the table below for informa-
tion:
Pin Signal Name
1 HD_LED_P
3 HD_LED_N
5 RST_SW_N
7 RST_SW_P
9 RSVD
* MSG LED (dual color or single color)
Hard Drive Activity LED
Connecting pins 1 and 3 to a front panel mounted LED provides visual indication that data
is being read from or written to the hard drive. For the LED to function properly, an IDE
drive should be connected to the onboard IDE interface. The LED will also show activity
for devices connected to the SCSI (hard drive activity LED) connector.
Power/Sleep/Message waiting LED
Connecting pins 2 and 4 to a single or dual-color, front panel mounted LED provides power
on/off, sleep, and message waiting indication.
Function Pin Signal Name
Hard disk LED+ 2 FP PWR/SLP
Hard disk LED- 4 FP PWR/SLP
Reset Switch 6 PWR_SW_P
Reset Switch
8 PWR_SW_N
Reserved 10 Key
Installing the Motherboard
Function
*MSG LED+
*MSG LED-
Power Switch
Power Switch
No pin
11