Stamina 55-4287 Owner's Manual page 12

OPERATIONAL INSTRUCTIONS
CARRIAGE WHEEL REPLACEMENT
To replace a carriage wheel, first remove the carriage by releasing the cords and sliding the carriage all
the way back to the top end or rear frame of the machine. Tip your machine on its side, bend the machine
at the hinge, and simply slide the carriage off the frame.
Turn the carriage upside down so it is cord side up. Using a crescent wrench and flat head screwdriver,
remove the screw that is holding the wheel in place. Replace the old wheel with the new one, add the
washer, push the screw through the wheel and tighten with the nut.
1 2 3 4
WEBSITE RESOURCES
You can find use and maintenance instructional video clips at www.staminaproducts.com.
12