Table of Contents
Advertisement
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: touch the
#
indicator above the main switch lights up. The hob is ready for
use.
To switch off: touch the
#
main switch goes out. All hotplates are switched off. The
residual heat indicator remains on until the hotplates have
cooled down sufficiently.
Note: The hob switches off automatically if all hotplates have
been switched off for more than 20 seconds.
Setting a hotplate
Set the required heat setting in the settings range.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat setting. This
is identified by a dot.
Set the heat setting
The hob must be switched on.
Touch the
symbol to select the hotplate.
³
1.
‹
and the
N
symbol for hotplate selection light up in the heat
setting display.
Table of cooking times
The following table provides some examples.
Cooking times and heat settings may vary depending on the
type of food, its weight and quality. Deviations are therefore
possible.
Melting
Chocolate, cooking chocolate, butter, honey
Gelatine
Heating and keeping warm
Stew (e.g. lentil stew)
Milk**
Heating sausages in water**
Defrosting and heating
Frozen spinach
Frozen goulash
* Continue cooking without a lid
** Without lid
symbol. A signal sounds. The
symbol until the display above the
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
Slide your finger along the settings range until the desired
2.
heat setting appears on the hotplate display.
To change the heat setting:
Select the hotplate and set the desired ongoing cooking setting
in the settings range.
To switch off the hotplate:
Select the hotplate and set to 0 in the settings range.
Notes
When the hotplate is selected, the
■
can adjust the settings immediately.
Hotplate temperature is regulated by the heat switching on
■
and off. The heat may also switch on and off at the highest
setting.
When heating thick liquids, stir regularly.
For bringing liquids to the boil, use heat setting 9.
Ongoing cooking
setting
1-2
1-2
1-2
1.-2.
3-4
2.-3.
2.-3.
symbol lights up. You
N
Ongoing cooking
time in minutes
-
-
-
-
-
20-30 mins
10-15 mins
5
Advertisement
Table of Contents
