Related Manuals for Siemens ET9 LMP1 Series
Summary of Contents for Siemens ET9 LMP1 Series
- Page 1 ET9..LMP1. EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
- Page 2 ET9..LMP1. Ø = cm...
- Page 3 Safety en Further information and explanations are available online: Table of contents 1.2 Intended use Only a licensed professional may connect ap- INFORMATION FOR USE pliances without plugs. Damage caused by in- correct connection is not covered under the Safety .............. 3 warranty. Only use this appliance: Preventing material damage ...... 4 ¡...
- Page 4 en Preventing material damage The cooking surface becomes very hot. If the appliance or the power cord is dam- ▶ Never place flammable objects on the aged, this is dangerous. cooking surface or in its immediate vicinity. ▶ Never operate a damaged appliance. ▶...
- Page 5 Environmental protection and saving energy en 2.1 Overview of the most common damage Damage Cause Measure Scratch Rough pot or Check your cookware. Here you can find the most common types of damage pan bases and tips on how to avoid them. Discol- Unsuitable Only use cleaning...
- Page 6 en Familiarising yourself with your appliance 4 Familiarising yourself with your appliance The instruction manual is the same for various different hobs. You can find the hob dimensions in the overview of models. → Page 2 4.1 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operat- ing status.
- Page 7 Basic operation en Single-circuit hotplate Hotplate Activating and deactivating Tri-circuit hot- ¡ Touch Dual-circuit hotplate plate Second filament circuit is Bridge heating element activated. ¡ Touch . Combination Activation Suitabil- Second and third filament circuit are activated. Small extended to activate Small cooking zone: com-...
- Page 8 en Basic operation 5.4 Setting the hotplates ¡ Food that needs to be seared quickly or that initially loses a lot of liquid during frying should be fried in To set a hotplate, it has to be selected. small portions. The left-hand hotplates are selected with the control panel on the left side and the right-hand hotplates with ¡...
- Page 9 PowerBoost function en Escalope, plain or breaded 6-10 Pancakes one by Escalope, frozen 8-12 Omelette 3.5-4.5 one by Chops, plain or breaded 8-12 Steak, 3 cm thick 8-12 Fried eggs Patties, 3 cm thick 4.5-5.5 30-40 Turn the dish several times. Hamburgers, 2 cm thick 10-20 Poultry breast, 2 cm thick 10-20...
- Page 10 en Time-setting options 8 Time-setting options Your appliance has different time-setting options which Automatically setting the cooking time can be used to set a cooking time, a kitchen timer or a Requirement: The hotplate is selected and set. The stopwatch. cooking time setting is activated. → Page 10 Touch the settings 1 to 5 on the control panel for 8.1 Cooking time longer.
- Page 11 Automatic switch-off en 8.3 Stopwatch function a Seconds are displayed during the first minute, then minutes. The stopwatch function displays the time which has passed since activating the function. Note: If you select another time-setting option in addi- The stopwatch function only works when the hob is tion to the stopwatch function, the setting appears on switched on.
- Page 12 en Basic settings 13 Basic settings You can configure the basic settings for your appliance 13.2 Changing basic settings to meet your needs. Requirement: The hob is switched off. Switch on the hob. 13.1 Overview of the basic settings Within the next 10 seconds press and hold You can find an overview of the basic settings and the approx.
- Page 13 Cleaning and servicing en 14 Cleaning and servicing To keep your appliance working efficiently for a long Requirement: The hob has cooled down. time, it is important to clean and maintain it carefully. Remove heavy soiling using a glass scraper. Clean the hob with a cleaning product for glass 14.1 Cleaning products ceramic.
- Page 14 en Disposal Fault Cause and troubleshooting All displays flash The control panel is wet or objects are lying on it. ▶ Dry the control panel or remove the object. Several hotplates have been used over a prolonged period at high power settings. The hot- plate has been switched off to protect the electronics.
- Page 15 Customer Service en 17 Customer Service Function-relevant genuine spare parts according to the The contact details for Customer Service can be found corresponding Ecodesign Order can be obtained from in the enclosed Customer Service directory or on our Customer Service for a period of at least 10 years from website.
- Page 16 en Installation instructions 18.5 Installing fixing rails ¡ Use the current load to determine which wire cross- section you require. A cross-section of < 1.5 mm² is For stone work surfaces, bond the fixing rails in place. not permitted. ¡ For a single-phase connection (1 N~), the power cable H05RR-F3G4 (length 1 m) is available from customer service.
- Page 20 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...