Setup Menu; System Setup - Sanyo LCD-32K30TD Owner's Manual

SETUP MENU

You may change system settings such as S/P DIF, Audio Preference, etc. by making use of Setup
menu.
1
Press MENU button and the main men screen displays.
2
Press ◄ or ► button to select Setup menu, Press ▼ button to access the menu.
3
Within the menu, press ▲ or ▼ to scroll through the page upward or downward, and press ▲, ▼,
◄ or ► button to navigate through the options or adjust an option.
4
Press BACK button to return to previous menu. Press MENU button or no operation for a few
seconds (the duration can be set) to exit the menu screen directly.
Option
ECO
Illumination
S/P DIF
Only for digital programs.
Audio Preference
Only for digital programs.
OSD Duration
Operating Mode
36

SYSTEM SETUP

Description
ECO mode is environmentally friendly mode by adjusting the screen
status to reduce power consumption. In this mode, you can select
Off, On or Sensor. When ECO is set "On", it will attain the best power
consumption.
To set the bright of the blue illumination. You can select Light or Dark.
To select the digital audio output mode for S/P DIF. You can select Auto
or PCM.
To select the audio output mode. You can select MPEG or Dolby D.
To set the display time of the MENU while no operation on the LCD TV.
You can select 5sec, 10sec, 15sec, 20sec, 25sec, 30sec or 60sec.
To select Operating Mode. You can select Standard/Energy Save mode
or Store/Dynamic mode. Recommending Standard/Energy Save mode
for normal home viewing.
Standard/Energy Save: Normal initial setting in Standard/Energy Save
mode. Picture mode will be Standard and ECO mode will be Sensor. When
you adjust picture settings or others, these will be stored in the last status
memory.
Store/Dynamic: Picture mode will be Dynamic and ECO mode will be
Off in Store/Dynamic MODE. After someone adjust Picture mode,
Picture settings and ECO mode, when 30 minutes is elapsed without
any operation, picture settings will return automatically to the initial
setting.