Download Print this page

Makita 9902 Instruction Manual

Hide thumbs Also See for 9902:

Advertisement

Quick Links

Belt Sander
MODEL 9902
MODEL 9903
MODEL 9920
MODEL 9404
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
003359

Advertisement

loading

Summary of Contents for Makita 9902

  • Page 1 Belt Sander MODEL 9902 MODEL 9903 MODEL 9920 MODEL 9404 003359 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using.
  • Page 2: Specifications

    8JD, ENGLAND faces. Responsible manufacturer: Power supply Makita Corporation Anjo Aichi Japan The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They...
  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
  • Page 4 19. Store idle power tools out of the reach of chil- Always use safety glasses or goggles. Ordinary dren and do not allow persons unfamiliar with eye or sun glasses are NOT safety glasses. the power tool or these instructions to operate Hold the tool firmly with both hands.
  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 003364 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF”...
  • Page 6 NOTE: 1. Dust bag • If you connect a Makita vacuum cleaner to this tool, more efficient and 2. Dust spout cleaner operations can be performed. 003389 1. Dust bag...
  • Page 7: Operation

    004231 Cleaner sanding operations can be performed by connecting the belt sander to Makita vacuum cleaner. When connecting to Makita vacuum cleaner, an optional hose 28 mm in inner diameter is necessary. 1. Optional hose 28 mm in inner diameter 2.
  • Page 8 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

This manual is also suitable for:

990399209404