• Due to our continuing programme of research and development, the specifications herein are subject to change
• Note: Specifications may differ from country to country.
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...................Read instruction manual.
..................Only for EU countries
Do not dispose of electric equipment
In observance of European Directive
2002/96/EC on waste electric and
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
compatible recycling facility.
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted sur-
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
76 mm x 533 mm
76 mm x 533 mm
For Model 9902/9903/9920/9404
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 85 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN60745, EN55014, EN61000 in
accordance with Council Directives, 89/336/EEC, 98/37/
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
Makita Corporation Anjo Aichi Japan
76 mm x 610 mm
210 - 440 m/min.
Yasuhiko Kanzaki CE 2005
100 mm x 610 mm