Circulation Operation - Hitachi RAS-S18CAK Instruction Manual

CIRCULATION OPERATION

■ Circulation Function
● During circulation operation, compressor does not run and there is no cooling operation with only indoor
fan running.
●
When the setting temperature is higher than room temperature, indoor fan will stop running.
Press the
1
(CIRCULATION).
Circulating operation starts with a beep.
2
Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).
3
Press the temperature control button to set to the desired
temperature.
Press the
STOP
■ As the settings are stored in memory in the remote controller,
you only have to press the
– 9 –
button so that the display indicates
(STOP) button to stop operation.
(CIRCULATION) button next time.