INDOOR UNIT INDICATORS
Use this switch to start and stop when the remote controller does not work.
By pressing the temporary switch, the operation is done in previously set operation mode.
When the operation is done using the temporary switch after the power source is turned off and turn on
again, the operation is done in automatic mode.
This lamp lights during operation.
This lamp lights when the timer is working.
When the device is operated for a total of about 200
hours, the FILTER lamp lights to indicate that it is
time to clean the À lter. The lamp goes out when the
(AUTO SWING)" button is pressed while the
device is on "STANDBY MODE".
This À gure shows the opening condition of
front panel. Refer to page 16 in relation to
how to open or close the front panel.
– 5 –