Wired Network; Connect The Network Cable - Brother MFC-J650DW Quick Start Manual

Wired Network

For Windows
®
(Windows XP Home/XP Professional/Windows Vista
14
Before you install
Make sure that your computer is ON and you are
logged on with Administrator rights.
NOTE
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
• The CD-ROM includes Nuance™ PaperPort™
12SE. This software supports Windows
Home (SP3 or greater), XP Professional (SP3
or greater), XP Professional x64 Edition (SP2
or greater), Windows Vista
®
Windows 7 and Windows
®
latest Windows
MFL-Pro Suite.
• If you have previously set up your machine for
a wireless network and then want to set it up on
a wired network, make sure the machine's
Network I/F is set to Wired LAN. The
wireless network interface will become inactive
with this setting.
On your machine, press
Press All Settings.
Press a or b to display Network.
Press Network.
Press a or b to display Network I/F.
Press Network I/F.
Press Wired LAN.
Press .
18
®
wired network interface users (MFC-J870DW only)
®
XP
®
(SP2 or greater),
®
8. Update to the
Service Pack before installing
(Settings).
® ®
/Windows 7/Windows
15
Connect the network
cable
a
Lift the scanner cover until it locks securely into
the open position.
b
Connect the network cable to the Ethernet port
marked with a
Ethernet port inside the machine, as shown in
the callout below. Remove the protective
cap b before connecting the cable.
1
2
Windows
®
8)
symbol a. You will find the
®