Unpacking - Mitsubishi CP-K60DW-S Operation Manual

UNPACKING

Take the printer out of the box by the following procedures. Make sure to check the accessories.
Open the printer box from the top and remove
the top cushion containing the accessories out
of the box.
Remove the protective cardboard and then take the accessories
out of the cushion.
Carefully pull the printer up and out of the box.
Pull the printer straight up as shown in the figure.
Printer weighs about 12 kg. Handle it with care.
Unwrap the packing.
Remove the protective materials for transportation such as
protective sheet.
Remove the paper strip bin before carrying the printer.
Hold the printer by the front and rear handle as illustrated in the
drawing.
• Do not carry the printer with the paper strip bin attached and
by holding the part under the paper strip bin. The paper strip
bin may be removed and fall. It may cause injury or damage.
• When the printing unit is not closed firmly or you press the
OPEN button accidentally, the printing unit may open. It can
cause injury or damage.
CONTENTS
The accessories items are placed in the top cushion. Check all items are included.
Quick setup
CD-ROM
guide
UNPACKING
NOTE
CAUTION
Power cord
Paper flanges Spacers
These are contained in the printing unit.
Make sure to remove the protective materials from the ink cassette and paper flanges.
Protective
cardboard
Securing band
Cable ties
Screws, Washer
Ink cassette Paper strip bin
Accessories
6