Mitsubishi DLP NW31U-EST User Manual page 48

Advanced display utilities (continued)
Thin client
Projecting the desktop screen of a remote computer
connected via a network onto the projector, you can
remotely control the remote computer through the
projector.
To use the thin client function, you need to install
the software "ThinClient_v200.exe" contained in the
attached CD-ROM.
Supported OS's are as follows:
• Windows XP Service Pack 3 (except Home Edition)
• Windows Vista (except Home Basic and Home
Premium)
• Windows 7 (except Starter and Home Premium)
• Windows Server 2008 R2
• Windows MultiPoint Server
Important:
• License terms for Windows XP, Windows Vista and
Windows 7 do not permit simultaneous operation
by multiple users.
• To use the thin client function with Windows Server
2008 R2 or Windows MultiPoint Server, a Client
Access License (CAL) is required. For details, see
"Client Access License (CAL)" on page 52.
Preparation for using Remote Desktop
The thin client function utilizes the standard Microsoft
Remote Desktop function. To use the Remote Desktop
function, perform the following preparations on the
computer.
Important:
• For the following preparations, log on to the
computer using the administrator account.
1. Creating a user account
Important:
• You must confi gure a password for the user
account Do not use double-byte characters for the
.
user account name and password.
2. Confi guring Remote Desktop users
Confi gure the Remote Desktop users as follows.
 In Windows Vista, Windows 7, Windows Server
2008 R2 or Windows MultiPoint Server
1. Select [Start]-[Control Panel].
2. In Windows Vista, select [System and
Maintenance]. Otherwise, select [System and
Security].
• When using Classic View in Windows Vista,
double-click the System icon and go to step 4.
3. Select [System].
4. Click [Remote settings].
5. Select [Allow connections from computers running
any version of Remote Desktop (less secure)].
6. Click [Select Users...].
• The "Remote Desktop Users" window is
displayed.
EN-48