Table of Contents
Advertisement
Menu operation (continued)
FEATURE menu
ITEM
ASPECT
PASSWORD FUNCTION DISPLAY INPUT
MENU POSITION
CINEMA MODE
VIDEO SIGNAL
SIGNAL DETECT
SETUP
LANGUAGE
HIGH ALTITUDE MODE
RESET ALL
•
CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.
•
The RESET ALL process may take some time to complete.
FEATURE
ASPECT
PASSWORD FUNCTION
MENU POSITION
CINEMA MODE
?
VIDEO SIGNAL
SIGNAL DETECT
SETUP
A
LANGUAGE
Ë
HIGH ALTITUDE MODE
RESET ALL
SETTING
NORMAL (FULL)
NORMAL (16:9)
NORMAL (4:3)
16:9
FULL
/
/
MENU ACCESS
SPLASH ID SCREEN
1 (upper left) / 2 (center)/
3 (lower right)
AUTO
OFF
AUTO / NTSC / PAL / SECAM
/ 4.43NTSC / PAL-M / PAL-N /
PAL-60
NORMAL (WXGA)
NORMAL (XGA)
ENHANCED
AUTO
OFF
3.75% / 7.5%
/ English / Español /
Deutsch / Français / Italiano /
/
/
/
PORTUGUÊS / SVENSKA /
POLSKI / MAGYAR /
Türkçe /
/
Bahasa Indonesia / Melayu
STANDARD
HIGH ALTITUDE
OK
opt.
NORMAL (FULL)
DISPLAY INPUT
1.
AUTO
AUTO
NORMAL (WXGA)
AUTO
English
STANDARD
OK
FUNCTION
Input video signal is displayed at the max height (800 pixels) or max
width (1280 pixels) of the panel while its aspect ratio is maintained.
Select this setting when using a 16:9 screen.
Select this setting when using a 4:3 screen.
Regardless of the type of input signal, image is displayed at 16:9
aspect ratio (1280 x 720 pixels). Select to expand squeezed (or
horizontally compressed) images such as DVD images to 16:9.
Press the ENTER button to select whether or not to display signals
at 16:9 depending on their type. (See page 22.)
Select to project images in full size (1280 x 800 pixels) irrespective
of type of input signal.
Use to enable or cancel the password lock. See page 61 for details.
Use to change the position of the menu.
The fi lm mode will be automatically activated when a fi lm source
signal is input. (Select AUTO for normal use.)
The fi lm mode will not be activated.
When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the image
isn't displayed correctly, select the desired video format manually.
Select this setting for wide picture.
Select this setting for other than wide picture.
Select this setting when the NORMAL mode does not display
images properly.
Select to change the SETUP mode automatically.
Select to make black lighter.
Select to make black thicker.
•
When 7.5% is chosen, the brightness is decreased by the set-
up cancel function for the U.S. Choose OFF when the image is
dark.
Use to select the language used in the menus.
/
Select this option for normal use.
Select this option for use at an altitude of 1500 to 2700 meters
above the sea level.
The menu settings are reset to the factory defaults (except the
LANGUAGE, PASSWORD FUNCTION and NETWORK settings).
EN-30
Advertisement
Table of Contents
