General Operation - Dual XD1228 Installation & Owner's Manual

Faceplate Removal
Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push left
side to secure.
Semi-permanent Remove trim ring and install supplied #1 x 7/32" Phillips
Faceplate Installation head screw through left side of mounting frame into
faceplate.
Power On/Off Press
on automatically. Press and hold for three seconds
turn the unit off.
Mode Press MODE to select between AM/FM, CD or auxiliary
input. Modes of operation are indicated in the display.
Auxiliary Input Insert a 3.5mm connector in the front panel AUX port.
Connect the other end of the 3.5mm connector to the
headphone output of an audio device, MP3 player, etc. Press
MODE to select AUX mode.
Volume Adjust volume using the volume knob (00-46).
Display
The radio frequency (tuner mode) and CD track/elapsed
time (CD player mode) will be shown by default. Press
DISP to display the clock, and press DISP again to return to
default display.
Set the Clock Press and hold DISP for 2 seconds, the clock will begin to
flash. Press TRACK
ll
save the clock settings.
12/24-hour Clock
The clock will display 12-hour AM/PM time in USA
frequency spacing mode (PM 10:00). In European frequency
spacing mode, the clock will display 24-hour time (22:00).
Reset Press and hold for more than 2 seconds to RESET the unit
upon initial installation. The RESET button is located behind
the faceplate.
All manuals and user guides at all-guides.com
XD1228 OPERATION
General Operation
to turn the unit on. Inserting a CD will turn the unit
nn
to adjust the hours and TRACK
to adjust the minutes. Press DISP or wait 5 seconds to
to
5