Wiring Diagram - Dual XD1228 Installation & Owner's Manual

BLUE Remote Turn-On
Connect to amplifier or power
antenna. Insulate wire if not used.
BLACK Ground
Connect to vehicle
chassis ground.
RED Accessory
Connect to ignition
circuit or switched 12 volt source.
5 AMP
AGC Fuse
YELLOW Memory
Connect to battery
circuit or constant 12 volt source.
Right Front
Gray/Black (-)
Gray (+)
Left Front
White/Black (-)
White (+)
* Caution - Do not attach any speaker leads to ground as severe damage will occur.
All manuals and user guides at all-guides.com
XD1228 INSTALLATION
Wiring Diagram
Rear Preamp Output
Connect to amplifier RCA input
RCA Cable
(sold separately)
Antenna Connector
Right Rear
Violet/Black (-)
Violet (+)
Left Rear
Green/Black (-)
Green (+)
AMP
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse could
damage the radio.
The XD1228 uses one
5 amp AGC fuse located
in-line.
3