Omron ZW Series Startup Manual page 45

For ethercat beckhoffplc＋ vision sensor

Hide thumbs Also See for ZW Series:

Table of Contents

4.3.2. Confirmation of communication status with ZW

You can confirm the EtherCAT communication status by ZW's LEDs.

Make sure the LED on the ZW

sensor controller.

LED status at the normal time is

as follows.(Connection state only

IN connector)

[L/A IN] ： Green lit (EtherCAT

Device Connected)

blinking

(When

with the EtherCAT device)

[ECAT RUN]：Green lit

[ECAT ERR]：Off state

Reference

How to deal with the error in detail, please refer to the manual.

Error! Reference source not found. Error! Reference source not found.

or Green

communicating

Confidential C

AST*-******

Table of Contents