Disable Upnp Function; Set Static Ip Address; Open Required Ports; Dmz Host Feature - NetComm NB6Plus4W Manual

4. Click on UPnP on the left menu and then deselect the 'Enable UPnP' option.
5. Click on Apply/Save.
6. Select Management > Reset Router.
7. Press the Reboot button and wait for the modem to reboot.
Next you will need to set a static IP address on your PlayStation and configure port forwarding on
the router for the PlayStation console;
Follow the instructions at the link below to set a static IP address on your Playstation:
http://portforward.com/networking/staticip-ps3-playstation-3.htm
You can use an IP address like 192.168.1.100 for example.
The following ports need to be opened on the NB6Plus4W Rev2 to successfully connect the PlayStation
console to the internet:
TCP Ports: 10070 - 10080
UDP Ports: 10070, 50000
Voice Chat: UDP 6000-7000, 10070 (for headset operation).
For assistance in configuring port forwarding on the NB6Plus4W Rev2 please see the NB6Plus4W Rev2 Port
Forwarding Setup Guide at
http://media.netcomm.com.au/public/assets/pdf_file/0018/41661/PFS-NB6Plus4W-Rev2.pdf
As an alternative to port forwarding you can choose to enable the DMZ Host feature on the
NB6Plus4W Rev2. The DMZ feature allows all port traffic for a specified IP address. Please check
the User Guide on page 73 if you need assistance with this at:
http://media.netcomm.com.au/public/assets/pdf_file/0015/40218/NB6Plus4W_REV2_UG.pdf
Please restart your PlayStation; you should be able to play online now.