Crestron MT-1000C Programming Manual page 12

3.8 Inch RF Remote Crestron MT-1000C
NOTE: The hardware and software settings of the RF ID must match. The RF
ID setting for the hardware is limited to numbers in increments of the most
significant digit (i.e., 00, 10, 20). The RF ID must also be set in VT Pro-e.
MT-1000C Symbol in Programming Manager
Programming Manager is where programmers "program" a Creston control
system by assigning signals to symbols. The following describes the MT-1000C
symbol in the SIMPL Windows Programming Manager.
Detail View of the MT-1000C in SIMPL Windows' Programming Manager
The MT-1000C can transmit up to 999 unique signal joins to a control system.
Every button can be programmed with multiple functions.
8 • 3.8 Inch RF Remote: MT-1000C
Programming Guide - DOC. 6330A