Download Print this page

Icom IC-2730A Instruction Manual page 4

Dual band transceiver
Hide thumbs Also See for IC-2730A:

Advertisement

PRECAUTIONS (Continued)
DO NOT push the PTT when not actually desiring to transmit.
DO NOT use harsh solvents such as benzine or alcohol to clean
the transceiver, as they will damage the transceiver's surfaces. If
the transceiver becomes dusty or dirty, wipe it clean with a soft,
dry cloth.
DO NOT use or place the transceiver in areas with tempera-
tures below –10°C (+14°F) or above +60°C (+140°F). Be aware
that temperatures on a vehicle's dashboard can exceed +80°C
(+176°F) in direct sunlight, resulting in permanent damage to the
transceiver if left there for extended periods.
DO NOT place the transceiver in excessively dusty environments
or in direct sunlight.
DO NOT place the transceiver against walls or putting anything on
top of the transceiver. This will obstruct heat dissipation.
Place the transceiver in a secure place to avoid inadvertent use
by children.
During mobile operation, NEVER place the transceiver where air
bag deployment may be obstructed.
During mobile operation, DO NOT place the transceiver where
hot or cold air blows directly onto it.
During mobile operation, DO NOT operate the transceiver with-
out running the vehicle's engine. When the transceiver's power
is ON and your vehicle's engine is OFF, the vehicle's battery will
soon become exhausted.
Make sure the transceiver power is OFF before starting the ve-
hicle engine. This will avoid possible damage to the transceiver
by ignition voltage spikes.
iii
During maritime mobile operation, keep the transceiver and mi-
crophone as far away as possible from the magnetic navigation
compass to prevent erroneous indications.
BE CAREFUL! The rear panel will become hot when operating
the transceiver continuously for long periods of time.
Use Icom microphones only (supplied or optional). Other manu-
facturer's microphones have different pin assignments, and may
damage the transceiver.
ABOUT CE
Versions of the IC-2730E which have the "CE"
symbol on the product, comply with the essential
requirements of the Radio Equipment Directive,
2014/53/EU, and the restriction of the use of certain
hazardous substances in electrical and electronic
equipment Directive, 2011/65/EU.
About the declaration of conformity
Hereby, Icom Inc. declares that the radio equipment type
IC-2730E is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the
following internet address:
http://www.icom.co.jp/world/support/

Advertisement

loading
Need help?

Need help?

Do you have a question about the IC-2730A and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Ic-2730e