Setting The Date And Time - Omron BF206-BT Manual

HBF-206IT-E_A_M.book Page 6 Wednesday, March 10, 2010 12:04 PM

3. Setting the Date and Time

When the power is turned on for the first time, it is necessary to set the date and time.
1.
Press the WEIGHT/OFF button to
turn on the power.
When the power is turned on for the first time,
the year digits blink.
2.
[TO SET THE YEAR]
1)
Press the GUEST/
adjust the year and press the SET/MODE
button to confirm.
• Setting range: 2010 to 2030
• Press continuously to rapidly advance in
increments of 10.
3.
[TO SET THE MONTH AND DAY]
1)
Press the GUEST/
adjust the month and press the SET/MODE
button to confirm.
Notes:
• If you need to correct while you are making settings:
Press the WEIGHT/OFF button to turn the power off and on again. The year digits blink, proceed from step 2 of
the procedure.
• If the power goes off while you are making settings:
The power is automatically turned off if no information is entered for 3 minutes when setting the date and time.
Press the WEIGHT/OFF button to turn the power off and on again.
• If you have to correct the date and time you have set:
Press the WEIGHT/OFF button, and press the SET/MODE button for 2 seconds or longer after "0.0 kg" appears
on the display.
The year digits blink, proceed from step 2 of the procedure.
Power Switch
The power will automatically switch off in the following conditions:
1. If the monitor is not used within one minute of "0.0 kg" appearing on the display.
2. If no information is entered for 3 minutes when setting the date and time.
3. If no information is entered for 3 minutes when entering personal data.
4. If the monitor is not used for 3 minutes after the measurement results or last (previous) measurement
results are displayed.
5. 30 seconds after the result is displayed when measuring weight only.
6. 10 seconds after "Err" appears on the display.
Note: "OFF" appears on the display when the power is turned off.
6
MEMO button to
4.
MEMO button to
2)
Press the GUEST/ MEMO button to
adjust the day and press the SET/MODE
button to confirm.
• Press continuously to rapidly advance in
increments of 10.
[TO SET THE HOUR AND MINUTE]
1)
Press the GUEST/ MEMO button to
adjust the hour and press the SET/MODE
button to confirm.
• This is the 24-hour clock.
2)
Press the GUEST/ MEMO button to
adjust the minute and press the SET/
MODE button to confirm.
• Press continuously to rapidly advance in
increments of 10.
The current settings for the year, month and
day, hour and minute appear in this sequence
on the display. The power is automatically
turned off.
This completes the setting.