TP-Link Omada OC200 User Manual page 29

Follow the steps below to create an SSID on the EAP:
1. If your EAP is a dual-band device, click
which the new SSID will be created.
2. Click to add a new SSID on the chosen band.


iipe
You can also click
to delete the SSID in the list.
3. Configure the following required parameters for this SSID:
SSID
SSID Broadcast
Security Mode
Guest Network
Rate Limit
4. Click OK to create the SSID.
Following is the detailed instructions about how to configure
WPA-Personal .
• WEP
WEP (Wired Equivalent Privacy) is a traditional encryption method. It has been proved
that WEP has security flaws and can easily be cracked, so WEP cannot provide effective
to edit the specific SSID which already exists in the list. And you can click
Specify a name for the wireless network.
With the option enabled, EAP will broadcast the SSID to the nearby
hosts, so that those hosts can find the wireless network identified by
this SSID. If this option is disabled, users must enter the SSID manually
to connect to the EAP.
Select the security mode of the wireless network. There are four
options:
None : Clients can access the wireless network without authentication.
WEP WPA-Enterprise
/
authentication before accessing the wireless network. For network
security, we recommend that you encrypt your wireless network. The
following sections will introduce how to configure these security modes.
With this option enabled, guest network will block clients from reaching
any private IP subnet.
With this option enabled, the download and upload rate of each client
which connects to the SSID will be limited to balance bandwidth usage.
You can limit the download and upload rate for some specific clients by
configuring rate limit in client list, refer to
get more details.
Note that the download and upload rate will be limited to the smaller
value if you set the limit value both in SSID and client configuration.
25
to choose a frequency band on
WPA-Personal
/ : Clients need to pass the
View Client Information
WEP
to
, WPA-Enterprise and