Sony XC-777A Operating Instructions Manual page 34

Location and Function of Parts
3 AGC (auto gain control) ON/OFF
Gain
Auto gain control
ON
(factory setting)
0 dB
OFF
4 Y/C/ VBS
Select the camera output signal.
Output signal
Select this position to
Y/C
output the Y/C
separated signal from
the DC IN/VIDEO
connector.
Select this position to
VBS
output the VBS signal
from the DC IN/VIDEO
(factory setting).
34
2 R control for manual white balance adjustment
This control is effective when the white balance switches
DIP switch setting
are set to MAN. Adjust the red color by turning the
control with the supplied screwdriver.
1 · · · · 6
3 B control for manual white balance adjustment
This control is effective when the white balance switches
are set to MAN. Adjust the blue color by turning the
1 · · · · 6
control with the supplied screwdriver.
4 DC IN/VIDEO connector (multi 12-pin)
This connector inputs DC 12V power and outputs the
video signal when the CCXC-12P05S/D/R/U/L camera
cable is connected.
DIP switch setting
5 Lens connector (3-pin)
Connect the auto-iris lens plug.
1 · · · · 6
1 · · · · 6