HoMedics Walgreens WGNBPA-755BT Manual page 13

Using Triple Check Measurement:
located on the back of the unit, is in the ON position.
2. Press the USER-SELECT button. After the user number
is selected, press the START/STOP button to confirm the
chosen user.
3. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
about 3 seconds.
Note:
begin after checking procedure is complete.
4.
monitor is Ready to Measure and will automatically inflate
as measurement continues.
Note:
Triple Check Rest Assure
ON OFF AM/PM ON OFF
Date Link
ON
measurement.
24
will begin before starting the second measurement
the third measurement.
Note:
monitor will repeat the measurement up to 3 times during the
consecutive measurement process.
average will be displayed.
average, press the button.
press the
button
25