Installation - Gavita CT 1930e Quick Start Manual

Led 120-277 v
Table of Contents

Advertisement

7

Installation

Warning! Mounting and installation of the LED fixture may only be executed by certified service personnel, in
accordance with applicable local laws and regulations.
Warning! The installer is responsible for correct and safe installation.
Warning! Ensure the local cabling can support the voltage and current requirements of the LED fixture.
Warning! Avoid coiled cords and keep mains leads separated. This prevents electromagnetic interference.
Warning! Do not connect or disconnect the LED fixture under load.
7.1
Installing the LED fixture
Warning! When mounting, attach the fixture to something that can support its entire weight.
Switch off main power.
Secure the hanging brackets to the fixture (fig. 3).
Hook the unistrut hanger onto the LED fixture hanging brackets (fig. 4).
Holding the LED fixture by the unistrut hanger with 2 hands, lift the fixture and place the hanger onto the unistrut as
shown in the picture (fig. 5).
The center of the fixture is located 4-3/16" from the front of the unistrut hanging bracket (fig. 6).
Install safety wire (B) as shown in picture (fig. 7).
If a controller is not being used, make sure the dummy plug is inserted into the "IN" RJ45 communication port (fig. 8).
Plug the female main power into the LED fixture's male power input (fig. 9). Align the white arrow on the end of the
power connector with the "Closed Lock" symbol on the fixture. Press in until there is a "click" sound.
Make sure power cords:
1. Are not concealed or extended through a wall, floor, ceiling, or other parts of the building structures.
2. Are not located above a suspended ceiling or dropped ceiling.
3. Are not permanently affixed to the building structure.
4. Are routed so they are not subject to strain and are protected from physical damage.
5. Are visible over their entire length.
6. Are used within their rated ampacity as determined for the maximum temperature of the installed environment
specified in the instructions.
3.
4.
5.
4

Advertisement

Table of Contents
loading

Table of Contents