Advertisement

Quick Links

Pro
line
CT 2000
Gavita
1
Introduction
Thank you for purchasing the Gavita CT 2000
the product and also describes how to use the product. Mounting and installation of the Gavita CT 2000
luminaire may only be executed by certified service personnel. Please read and understand this manual completely before
using the product. Only use the product as specified in this manual.
1.1
Used Symbols
Warning! A warning indicates severe damage to the user and/or product may occur when a procedure is not carried
out as described.
Caution! A caution sign indicates problems may occur if a procedure is not carried out as described. It may also
serve as a reminder to the user.
Note: A note gives additional information, e.g. for a procedure.
This symbol indicates that the Gavita can reach very high temperatures (>75 °Celsius). Observe a cool down period
before performing maintenance.
The symbol on the material, accessories or packaging indicates that this product may not be discarded as
household waste. By disposing of the equipment in the proper way, you will be helping to prevent possible risks
to the environment and public health, which might otherwise be caused by improper handling of the discarded
equipment. Recycling of materials contributes tot the conservation of natural resources. Therefore, please do not
dispose of your old electronics and electrical appliances via household waste.
This symbol indicates the minimum distance between the luminaire and the lit surface.
1 m
This symbol indicates that the luminaire contains a bright light source. Do not stare into the light source when
switched on.
This symbol indicates a risk of electric shock. Do not remove the lens. There are no servicable parts inside the
luminaire.
2
Product description
The Gavita CT 2000
intended to be used in greenhouses or in climate rooms (indoor or outdoor).
Reinforced insulation was provided between input circuit and output/ dimming circuit. Basic insulation between output
circuit and dimming circuit
In this manual, the Gavita CT 2000
e
LED EU 230-400V. This manual describes the mounting and installing of
e
LED EU 230-400V is an electronic horticultural LED luminaire. The Gavita CT 2000
e
LED EU 230-400V will be referred to as: "the luminaire".
e
LED EU 230-400V
1
LED EU 230-400V
e
LED EU 230-400V is
e

Advertisement

Table of Contents
loading

Summary of Contents for Gavita Proline CT 2000e

  • Page 1 Thank you for purchasing the Gavita CT 2000 LED EU 230-400V. This manual describes the mounting and installing of the product and also describes how to use the product. Mounting and installation of the Gavita CT 2000 LED EU 230-400V luminaire may only be executed by certified service personnel.
  • Page 2: Product Information And Specifications

    Product information and specifications General product information Product name Gavita CT 2000 LED EU 230-400V Manufacturer Gavita International BV Version EAN Code 8718403056938 8718403056952 8718403056945 8718403056969 8718403056976 8718403056983 Part number HGC906702 HGC906704 HGC906703 HGC906705 HGC906706 HGC906707 Technical specifications...
  • Page 3: Safety Recommendations And Warnings

    Compatible products and accessories Product name Gavita part number Compatible power cord Gavita RST Mains cable DCA 0.6m CB6873121 Gavita RST Mains cable DCA 1.0m CB6853431 Power cord EU, 5 meter PC6852017 Power cord UK, 5 meter PC6852018...
  • Page 4: Installation

    Warning! Do not connect or disconnect the Wieland RST20i3 plug under load. Installation preparations 1. Switch off mains power. 2. Read the Gavita light distribution plan. 3. Always keep a safe distance between the luminaire and an illuminated surface (3).
  • Page 5 The repeater bus connection kit contains the following items: A. 2 x EMC ferrite snap-on black bag (13x12x5x25.5x2.4) B. 4 x Gavita splitter 1 to 2 6P6C grey RJ25 (in bag) C. 8 x grey modular jack interconnect cable 6P6C RJ25 (in bag) D.
  • Page 6 line line Connecting up to 100 luminaires Using a setup with daisy chained splitters, up to 100 luminaires on RS1, EL1 or EL2 can be connected as shown in fig. 13. 1. Remove the dummy from the input port on the first luminaire (11). Note: Keep the dummy in a safe place! The dummy is necessary to operate the luminaire in standalone mode.
  • Page 7 line line Connecting up to 500 or 1000 luminaires Using a setup with daisy chained splitters, up to 500 luminaires on RS1 or EL1 and 1000 luminaires on EL2 (over two channels) can be connected as shown in fig. 14. 1.
  • Page 8 Never use household timers to switch the luminaire! 1. Switch off mains power. 2. Connect the power cable to the mains. The Gavita® CT 2000e LED 240- 400 V power cables connect to either a 240V receptacle or an open-end cable.
  • Page 9: Inspection, Maintenance And Repair

    (5) years from the date of purchase of the original product. For service return the Gavita CT 2000e LED EU luminaire to your shop with the original sales receipt.
  • Page 10 Gavita International BV T +31(0)297-380 450 Manual: Gavita Pro CT2000 230-400V Naritaweg 8 F +31(0)297-380 451 Changes reserved - Version v21-47 1437 EL Rozenburg NH info@gavita.com Not for sales or use in the Netherlands The Netherlands www.gavita.com...

Table of Contents