Gas Regulator; Base Metal Voltage Detection Wire; Remote Controller; Water Coolant - Panasonic YD-400VP1YHD Operating Instructions Manual

4. Configuration

4.2.3 Gas regulator

• Model No.: YX-25AD1 (For CO
• Model No.: YX-503A (For MIG)
4.2.4 Base metal voltage detection
wire
• Model No.: DWU35317

4.2.5 Remote controller

• Model No.: YD-40GTR1
• Model No.: YD-00DCR(Digital remote control-
ler)
< Note >
To use the digital remote controller with this
torch, parts of the usage are different from the
instruction in the operating instruction of the
digital remote controller. Therefore, make sure
to read "6.3.2 Digital remote controller"on
page 45 prior to use.

4.2.6 Water coolant

• Model No.: YX-09KGC1THA

4.2.7 Welding table expansion unit

This unit is to add a welding table that contains
welding characteristics.
Model Welding
number process
YX-PDP004 CO2/MAG
Note
Welding table expansion unit is applicable from
the software version 2.00 or later.
To check the current software version, please
refer to "7.1.1 Operation flow" on page 60.
18
/MAG/MIG)
2
Wire Wire
Model
material size
Mild solid
1.6 mm YD-400VP1YHD
steel
WMD078TE0PAA07