Vortex PRO Product Manual page 2

BUBBLE LEVEL
KNURLED
CONTROL RING
2
Attaching/Removing the Leveling Head
The Pro Leveling Head is compatible with the High
Country
Vortex
Note: You can also swap the 3/8"-16 threaded insert for a 1/4"-
20 threaded insert on the bottom of the leveling head for use
1/4"-20 THREAD
with any tripod with 1/4"-20 thread.
To attach the leveling head to the tripod:
1. Remove the pan head from the tripod by turning the
head counter-clockwise.
2. Install the leveling head by turning the head
clockwise.
3/8"-16 THREAD
PRO TRIPOD LEVELING HEAD
II, Summit Carbon, and Ridgeview
™ ™
tripods, or any tripod with a 3/8"-16 thread.
®
3
Carbon
™