Advertisement
About This User's Guide
This user's guide is written for system integrators, IT technicians and knowledgeable end
users. It provides information and instructions on how to configure Intel Network Interface
Card (NIC) settings on Supermicro's X12 DP/MP motherboards.
About Intel Network Interface Card (NIC) Configuration
This user's guide describes the settings of onboard Intel® LAN devices via the BIOS Setup
utility supported by the Unified Extensible Firmware Interface (UEFI) driver. NIC is a computer
hardware device that allows a computer (system) to be connected to a computer network.
For processor/memory updates, please refer to our website at
products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Note: Additional Information given to differentiate various models or to provide in-
formation for proper system setup.
Preface
3
Preface
http://www.supermicro.com/
Advertisement
