hergom CARES Installation, Use And Maintenance Instructions page 11

Table of Contents

Advertisement

Available languages

Available languages

The front of the Cares cooker is made of cast
iron with a vitreous porcelain enamel finish;
the hinges are made of steel and the controls
are stainless steel.
The internal frame of standing cookers is built
of galvanized steel and painted steel plate.
The frame of the elevating worktop is made of
steel plate.
Note: If the cooker is used to heat the house
for extended periods, we recommend lifting
the top, in order to allow more heat into the
room, consume less fuel and avoid any damage
to the cooker.
If you want to cook on the hob, it is advisable
to lift the glass ceramic top and cook directly
on the enamelled base, which reach higher
temperatures than the glass top.
Ovens: All versions include: grid with steel
rods.
Oven door with glass ceramic tinted window
with a thermometer to control the cooking
temperature.
1.
INTRODUCTION
Anti-tip oven tray, which can be pulled out
almost completely without the risk of the
contents sliding off. The said supports are easy
to remove (slide them up, free them from the
lower hole and then slide them out to free them
from the top hole) to clean outside the oven.
Secondary air intake:
At the top of the glass pane on the door. It is
also used to clean the glass pane.
The soot cover is hidden under the oven door.
11
COVER

Advertisement

Table of Contents
loading

This manual is also suitable for:

Classic series

Table of Contents