Advertisement
Installing the Lift Bracket
Important:
The extended cargo bed is removed from the figure for clarity; do not remove the extended
cargo bed.
1.
Remove the existing bolt and nut from the rear-frame tube.
Note:
Discard the bolt and nut.
2.
Remove the 2 existing plastic rivets from the rear-frame tube.
Note:
Retain the 2 plastic rivets.
3.
Install the lift bracket to the rear-frame tube using the 5 flange-head bolts (3/8 x 2-1/2 inches) and 5
flange nuts (3/8 inch).
4.
Install the 2 previously removed plastic rivets into the rear-frame tube.
1x
5x
5x
3
g281201
Advertisement
