AquaScape 77020 Instructions & Maintenance page 6

STEP 9
ATTACH PIPE TO WATER PUMP
• Attach the other end of the pipe to the selected water
pump (not included). It is recommended to use a hose
clamp (not included) to secure the tubing onto the fitting.
STEP 10
NATURALIZE THE FILTER (optional)
• If desired, the Pond Waterfall Filter can be turned into a
beautiful, natural-looking waterfall using rocks or other
creative landscape materials.
• A well-designed waterfall often consists of two frame rocks
and a spillway rock which create a passage for water flow.
• Place two larger rocks or boulders on either side of the
intended water flow. Then, set one or more spillway rocks
between the frame rocks. Small rocks and gravel can then
be used to fill in gaps between the larger rocks.
FRAMING
ROCK
6
FRAMING
ROCK
SPILLWAY
ROCK
STEP 11
DISGUISE THE FILTER (optional)
• Soil, rocks, or other landscape materials can be built up
around the back of filter to disguise it into the landscape.
STEP 12
PLUG IN PUMP
• Plug in the pump and enjoy the benefits of cleaner water!
☎ ☎
US (866) 877-6637 | CAN (866) 766-3426 | aquascapeinc.com