Advertisement
Adjusting the duty ratio while the motors are
rotating is recommended
Be sure to adjust the duty ratio gradually. For
safety reasons, please initiate the motors at a
lower duty ratio and increase gradually.
The Brake function sets the potential at both
leads of the motor to ground and instantly
stops the motor.
The Open function sets both leads of the motor
to an open circuit, which decelerates the motor
to a complete stop.
For additional details, please see the attached
Appendix.
For more details on the following features, please
refer to the attached Appendix:
⑦ GUI Language configuration
⑧ GUI Tool Tip display
⑨ Help function
⑩ Closing the GUI
LV8548MCSLDGEVB for Brush DC motor
www.onsemi.com
When finished, exit the GUI by pressing the "Exit"
button at the bottom right of the screen or by
clicking "Exit" item at the top menu bar.
The following popup message will be displayed
when exiting the GUI.
Select "Yes" to quit the GUI.
Select "No" to cancel the exit and return to the main
screen.
If the GUI is closed while the motor is still running,
the motor will be stopped and the window will
close.
For more details on the following features, refer to
the next section on How to use the GUI Log:
⑪ Saving the GUI log
⑫ Clear the GUI log
⑬ Program generation
8
Advertisement
