Kernau KFWD 8642 User Manual page 66

3. Delay Timer
You can use this auxiliary function to delay the start time of
the washing cycle for 1 to 23 hours.
To use the delay function:
• Press the delay key once.
• "01h" will be displayed.
• Press the delay key until you reach the time after which you want the machine to start the washing cycle.
• If you have skipped the delay time you would like to set, you can keep pressing the delay key until you
reach that time again.
• To use the time delay function, you need to press the Start/Pause key to start the machine.
• If you want to cancel the delay:
- If you have pressed the Start/Pause key to start the machine, you just need to press the delay key once.
The will go off on the electronic display.
- If you have not pressed the Start/Pause key, press the delay key continuously until
electronic display. The
NOTE:
In the case that you want to select the auxiliary function feature, if the auxiliary function LED is not on, this
means that this feature is not being used in the washing programme you have selected.
4. Time Dry selection :
If you continue pressing, duration options (0:30, 0:60, 0:90,
120 minutes) will be displayed. You can select the drying
duration you want.
NOTE:
If one of the 30' 60' 90' 120' above drying duration options is not displayed when you press the Time Dry
button, it is not available for the selected programme.
Table: Recommended drying durations for load amounts:
Amount of
laundry to dry
1 kg
2 kg
3,0 kg
3.5 kg
If the amount of laundry to be dried is above 3.5kg, we
recommend that you select Cupboard, Hanger or Iron
will light up on the electronic display.
will go off on the electronic display.
Recommended drying time
30 minutes
60 minutes
90 minutes
120 minutes
Drying.
EN 66
goes off on the