CHAPTER 3: SETTING UP YOUR MACHINE
Your machine must only be installed by an authorised service company.
REMOVE THE TRANSIT SCREWS
1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of
the machine. If the bolts are not removed, they may cause heavy vibration, noise and malfunction of
the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate spanner.
3. Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the gaps left by the removal of the
transit bolts. The transit bolts should be stored for future use.
NOTE:
Remove the transit bolts before using the machine for the first time. Faults occurring due to the machine
being operated with transit bolts fitted are out of the scope of the warranty.
1
4
X
3
EN
4
X
2
4
56