LIFAN Power USA Platinum Series Operating Instructions And Owner's Manual page 30

30 30
5. Lubricate the threads of the Spark Plug with anti-seize compound or engine oil.
6. Re-install the Spark Plug and Spark Plug Cap.
FUEL SYSTEM MAINTENANCE:
NOTE: Periodically you can get sediment or trash in your Carburetor Bowl. Use the following
procedures to clean:
1. Turn the fuel valve to the "OFF" Position.
2. Remove the carburetor bowl by removing the mounting bolt located at the bottom of the bowl.
3. Dump out the old fuel and sediment into an approved container and clean carburetor bowl
thoroughly.
MAINTENANCE
SPARK PLUG MAINTENANCE
2. Remove Spark Plug with socket and handle supplied with your unit (refer to
"Spark Plug Removal" figure below.)
3. Clean any carbon build-up around the Spark Plug.
4. Check the Spark Plug Gap and adjust if necessary. 0.30-inch gap.
1. Remove Spark Plug Cap (refer to "Spark Plug Cap
Removal" figure below.)