LIFAN Power USA Platinum Series Operating Instructions And Owner's Manual page 20

20 20
CONNECTING ELECTRICAL LOADS:
1. Ensure engine is started before plugging in any electrical appliance.
2. Plug in desired 120 Volt loads to the 120 Volt U-Ground and 240 Volt loads to the 240 Volt
receptacles. Always plug appliances into the generator with appliance in its "OFF" position.
3. Do NOT connect 240 Volt loads to the 120 Volt receptacles.
4. Only connect single-phase 60 Hertz loads.
5. DO NOT OVERLOAD THE GENERATOR. FOLLOW THE PROVIDED "GENERATOR
WATTAGE REFERENCE WORKSHEET" TO DETERMINE THE RUNNING AND STARTING
WATTAGE OF YOUR EQUIPMENT REFER TO THE PRODUCT SPECIFICATIONS TO
ENSURE YOUR GENERATOR WILL OPERATE THE DESIRED EQUIPMENT.
NOTE: Use the running and starting wattage provided by the equipment manufacturer if avail-
able. If not available, use provided "Generator Wattage Reference Worksheet."
OPERATING YOUR
GENERATOR